 | Henry Charles Horstmann, Victor Hugo Tousley - 1908 - 352 стор.
...freight compartment may be separately controlled. 76. Cut-Outs. (For construction rules, see No. 52.) a. Must be placed at every point where a change is made in the size of the wire (unless the cut-out in the larger wire will protect the smaller). b. In such places as upper-decks,... | |
 | International Correspondence Schools - 1908 - 660 стор.
...put up and the molding secured to this. b. Capping must be secured by brass screws. Cut-Outs — a. Must be placed at every point where a change is made in the size of the wire (unless the cut-out in the larger wire will protect the smaller). b. In places such as upper... | |
 | 1909 - 870 стор.
...can be maintained. 28. Locution of Cut-Outs. — In addition to the requirements already mentioned, cut-outs must be placed at every point where a change is made in the size of wire, unless the nearest cut-out in the larger wire circuit will open before the smaller wire can be injured. ' Cut-outs... | |
 | United States. Bureau of Corporations - 1909 - 648 стор.
...always visible with the name of trie maker and current and voltage for which the device is designed (e) Must be placed at every point where a change is made in the size of the wire (unless the cut-out in the larger wire will protect the smaller) . (d) When placed anywhere... | |
 | 1910 - 232 стор.
...building, inside the walls thereof, and arranged to cut oft the entire current in the building. They must be placed at every point where a change is made in the size of the wire, provided the cut-out in the larger wire will not protect the smaller: and must be so placed... | |
 | National Carbon Company, Inc - 1911 - 84 стор.
...the point where they enter the building and arranged to cut off the entire circuit from the house. Cut-outs must be placed at every point where a change...cut-out in the larger wire will protect the smaller. No set of incandescent lamps requiring more than 660 watts, whether grouped on one fixture or several,... | |
 | William A. Radford - 1913 - 912 стор.
...the fuses in the mains are often changed without regard to the size of the wires in the buildings. b. Must be placed at every point where a change is made...cut-out in the larger wire will protect the smaller. For 3-wlre DC, or single-phase systems, the fuse In the neutral wire, except that called for under... | |
 | Joseph Gerald Branch - 1913 - 316 стор.
...the next fuse back is small enough to properly protect the wires inside the building in question. b. Must be placed at every point where a change is made...cut-out in the larger wire will protect the smaller). c. Must be in plain sight, or enclosed in an approved cabinet, and readily accessible. They must not... | |
 | 1913 - 460 стор.
...current is a problem for the electrical engineer. The point to be noted here is that fuses or breakers must be placed at every point where a change is made in the size of wire unless the fuse next back will also protect the smaller wire. The rated capacity of fuses must not exceed the... | |
 | Dallas (Tex.). - 1914 - 266 стор.
...and branch circuits entering other buildings need not ordinarily be protected by entrance fuses. (e) Must be placed at every point where a change is made in the size of wire, unless the cut-out in the large wire will protect the smaller. (f ) No main or branch fuse block of capacity less than twenty-five... | |
| |
Must be placed at every point where a change Is made in the size of wire (unless the cut-out In the larger wire will protect the smaller.) (c) Must be in plain sight, or enclosed in an approved cabinet, and readily accessible. 
