| Francis Bacon Crocker - 1904 - 696 стор.
...is inside the building, the cutout required by this section must be placed so as to protect it. b. Must be placed at every point where a change is made...cutout in the larger wire will protect the smaller 1see No. 10)]. c. Must be in plain sight, or inclosed in an approved box (see No. 54) and readily accessible.... | |
| 1905 - 484 стор.
...well as the current and voltage for which the device is designed. Cut-outs or circuit breakers should be placed at every point where a change is made in the size of wire, unless such a device in the larger wire will protect the smaller. They should never be placed in canopies... | |
| Norman Hugh Schneider - 1905 - 346 стор.
...however is made for larger currents. Cartridge fuse cut-outs are made for wider ranges of current. Cut-outs must be placed at every point where a change is made in the size of the wire except where a cut-out in the larger wire will protect the smaller wire, and must be placed... | |
| 1906 - 582 стор.
...put up and the molding secured to this. b. Capping must be secured by brass screws. Cut-Outs — a. Must be placed at every point where a change is made in the size of the wire (unless the cut-out in the larger wire will protect the smaller). b. In places such as upper... | |
| 1906 - 590 стор.
...well as the current and voltage for which the device is designed. Cut-outs or circuit breakers should be placed at every point where a change is made in the size of wire, unless such a device in the larger wire will protect the smaller. They should never be placed in canopies... | |
| 1906 - 544 стор.
...put up and the molding secured to this. b. Capping must be secured by brass screws. Cut-Outs — a. Must be placed at every point where a change is made in the size of the wire (unless the cut-out in the larger wire will protect the smaller). b. In places such as upper... | |
| American School (Lansing, Ill.) - 1907 - 438 стор.
...well as the current and voltage for which the device is designed. Cut-outs or circuit breakers should be placed at every point where a change is made in the size of wire, unless such a device in the larger wire will protect the smaller. They should never be placed in canopies... | |
| Charles Edwin Knox - 1907 - 242 стор.
...f — £3 / IS] Main No. 0 B and S Main No. 6 B and S -Feeder from Main Switchboard FIG. 54 of the wire (unless the cut-out in the larger wire will protect the smaller)," and consequently to place a number of fuses in "series," located at different points. This always causes... | |
| Saint Paul (Minn.). - 1908 - 1260 стор.
...is inside the building, the cutout required by this section must be placed so as to protect it. b. Must be placed at every point where a change is made...cut-out in the larger wire will protect the smaller). c. To be enclosed in an approved cabinet, or provided with an approved cover (see No. 52). They must... | |
| International Correspondence Schools - 1908 - 754 стор.
...the next fuse back is small enough to properly protect the wires inside the building in question. b. Must be placed at every point where a change is made...cut-out in the larger wire will protect the smaller). 29. The object of a fusible cut-out is to protect the wire; therefore, it must be placed so that all... | |
| |