 | Frank Eugene Kidder - 1892 - 1058 стор.
...tube or hard rubber tube. (g) Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. LAMPS AND OTHER DEVICES. 13. Arc Lamps.... | |
 | Earle Abbott Merrill - 1892 - 188 стор.
...and rubber hooks are prohibited. 7. So spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered to insure preservation, and covered with an insulation equal to that on the conductors. The following formula for soldering fluid... | |
 | National Electric Light Association. Convention - 1892 - 458 стор.
...and rubber hooks are prohibited. 7. So spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered to insure preservation, and covered with an insulation equal to that on the conductors. The following formula for soldering fluid... | |
 | Charles M. Davis - 1893 - 162 стор.
...tube or hard-rubber tube. g. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered to insure preservation, and covered with an insulation equal to that on the conductors. 13. ARC LAMPS— in every case— a. Must... | |
 | 1894 - 620 стор.
...rubber hooks are prohibited. 7. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered to Insure preservation and covered with an insulation equal to that on the conductors. 1 . Adopted at the Washington Convention,... | |
 | Arthur Vaughan Abbott - 1895 - 646 стор.
...rubber hooks are prohibited. 7. Must be so spliced or joined as to be both mecnanically and electrically secure without solder. They must then be soldered to insure preservation, and covered with an insulation equal to that on the conductors. The following formula for soldering fluid... | |
 | Richard Henry Pierce - 1896 - 234 стор.
...non-combustible insulating tube. g. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. DEFINITION of the word APPROVED as used... | |
 | Earle Abbott Merrilol - 1896 - 232 стор.
...noncombustible insulating tube. g. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. LAMPS AND OTHER DEVICES. 13. ARC LAMPS—In... | |
 | George H. Kimber - 1896 - 80 стор.
...cause trouble on a circuit. e. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. All joints must be soldered, even if made... | |
 | Russell Robb - 1896 - 206 стор.
...noncombustible insulating tube. g. Must be so spliced or joined as to be both mechanically and electrically secure without solder. They must then be soldered, to insure preservation, and covered -with an insulation equal to that on the conductors. The "terminal insulators" are the last... | |
| |
Must be so spliced or joined as to be both mechanically and electrically secure without solder; they must then be soldered to insure preservation, and the joint covered with an insulation equal to that on the conductors. 
