 | American School of Correspondence, American School (Lansing, Ill.), Edward Nichols - 1907 - 236 стор.
...straight joint visible on the face, or let into a chase, sometimes called a "slip-joint " (Fig. 122), so that the straight joint may not show, but, if it is necessarv to bond them together, the new work should be built in a quick-setting' cement mortar, and... | |
 | American School of Correspondence, Chicago, Alfred Edward Phillipps, Austin Thomas Byrne - 1908 - 150 стор.
...either with a straight joint visible on the face, or let into a chase, sometimes called a "slip-joint," so that the straight joint may not show; but if it...out with a hooked iron point and the surfaces well wetted before the fresh mortar is applied. nASONRY STRUCTURES. The component parts of masonry structures... | |
 | 1909 - 474 стор.
...straight joint visible on the face, or let into a chase, sometimes called a "slip-joint " (Fig. 122), so that the straight joint may not show, but, if it...should be built in a quick-setting cement mortar, anjl each part of it allowed to set before being loaded. In pointing old masonry, all the decayed mortar... | |
 | 1910 - 424 стор.
...straight joint visible on the face, or let into a chase, sometimes called a "slip-joint " (Fig. 122), so that the straight joint may not show, but, if it...out with a hooked iron point, and the surfaces well wetted before the fresh mortar is applied. Lining of old walls should be not less than eight inches... | |
 | Austin Thomas Byrne - 1910 - 628 стор.
...with a straight joint visible on the face, or let into a chase, sometimes called a " slip- joint," so that the straight joint may not show ; but if it...out with a hooked iron point and the surfaces well wetted before the fresh mortar is applied. Definitions of the Terms used In Masonry. ABUTMENT : 1.... | |
 | 1912 - 478 стор.
...straight joint visible on the face, or let into a chase, sometimes called a "slip-joint " (Fig. 122), so that the straight joint may not show, but, if it...out with a hooked iron point, and the surfaces well wetted before the fresh mortar is applied. Lining of old walls should be not less than eight inches... | |
 | International Correspondence Schools - 1914 - 880 стор.
...either with a straight joint visible on the face, or let into a chase, sometimes called a slip joint, so that the straight joint may not show; but, if it...loaded. In pointing old masonry, all the decayed mortar should be completely raked out with a hooked iron point, and the surfaces should be well wetted before... | |
| |
... so that the straight joint may not show ; but if it is necessary to bond them together the new work should be built in a quick-setting cement mortar and each part of it allowed to set before being loaded. In pointing old masonry all the decayed mortar... 
