Пошук Зображення Карти YouTube Новини Gmail Диск Календар Більше »
Увійти
Книги Книги 31 - 40 з 59 у Must be so spliced or joined as to be both mechanically and electrically secure without....
" Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. "
Electric Wiring for the Use of Architects, Underwriters, and the Owners of ... - Сторінка 89
автори: Russell Robb - 1896 - 183 стор.
Повний перегляд - Докладніше про цю книгу

The Texas Civil Appeals Reports: Cases Argued and Determined in the ..., Том 46

Texas. Court of Civil Appeals - 1909
...enacted, in substance, that live wires must have an approved weather or rubber insulating covering, and be so spliced or joined as to be both mechanically and electrically secure without solder, and the joints must then be soldered to insure preservation and covered with an insulation equal to...
Повний перегляд - Докладніше про цю книгу

Practical Operation of Arc Lamps

National Carbon Company, Inc - 1911 - 75 стор.
...be used. Tie wires must have an insulation equal to that of the conductors which they confine. Wires must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Cyclopedia of applied electricity: a general reference work on direct ..., Том 5

American Technical Society - 1913
...extend outside of the casing, the flameproof covering will not be required on the motor leads. (5) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. Joints...
Повний перегляд - Докладніше про цю книгу

Electric Railways: A Comprehensive Treatise on Modern Electric Railway ...

Henry H. Norris - 1913 - 281 стор.
...extend outside of the casing, the flameproof covering will not be required on the motor leads. (5) I^ust be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. Joints...
Повний перегляд - Докладніше про цю книгу

Practical electric wiring

John MacLaren Sharp - 1915 - 256 стор.
...Electrical Code the requirements for wire joints and splices are as follows : (16 — C) The wires "must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered unless made with some form of approved splicing device and covered...
Повний перегляд - Докладніше про цю книгу

Digest of the City of Little Rock, Arkansas

Little Rock (Ark.). - 1915 - 459 стор.
...& S. gauge, (b) Tie wires must have an insulation equal to that of the conductors they confine, (c) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be sold«red to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Standard Wiring for Electric Light and Power: As Adopted by the Fire ...

Harry Cooke Cushing - 1915 - 224 стор.
...knobs which ^mll separate the wires at least one inch from the surface zirired over, supports to be e. Must be so spliced or joined as to be both mechanically and electrically secure without * solder (see p. 40). The joints must then be soldered, to insure preservation, and covered with an insulation...
Повний перегляд - Докладніше про цю книгу

Medical Electricity Röntgen Rays and Radium: With a Practical Chapter on ...

Sinclair Tousey - 1915 - 1219 стор.
...attached must be covered over their entire surface with at least two coats of waterproof paint. (/) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Modern Electrical Construction: A Reliable, Practical Guide for the Beginner ...

Henry Charles Horstmann, Victor Hugo Tousley - 1916 - 439 стор.
...cause it to cut through the insulation. Cleats such as are shown at (8) and (9) are preferable. c. Most be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered unless made with some form of approved sphcing device, and covered...
Повний перегляд - Докладніше про цю книгу

Wiring for Light and Power: A Detailed and Fully Illustrated Commentary on ...

Terrell Croft - 1917 - 426 стор.
...thickness of such a leather cushion under a nail head should never be less than ^ in. 16c. If/. WIRES. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered unless made with some form of approved splicing device, and covered...
Повний перегляд - Докладніше про цю книгу




  1. Моя бібліотека
  2. Довідка
  3. Розширений пошук книг
  4. Завантажити файл PDF