| Albert August Schuhler - 1924 - 416 стор.
...requirements of the National Electrical Code relating to splices and joints specify that conductors must be so spliced or joined as to be both mechanically and electrically secure prior to soldering. The joints must then be soldered to insure preservation, unless some form of approved... | |
| 1939 - 1194 стор.
[ Відображення вмісту сторінки заборонено ] | |
| 1939 - 1192 стор.
...watertight. *tFor statutory and source citations, see note to § 63.1. Page 781 Splices shall be so joined as to be both mechanically and electrically secure without solder. They shall then be soldered and properly insulated and further protected by waterproof tape. Changes or... | |
| United States. Coast Guard - 1942 - 166 стор.
...and machinery spaces, galley, and those exposed to weather shall be watertight. Splices shall be so joined as to be both mechanically and electrically secure without solder. They shall then be soldered and properly insulated and further protected by waterproof tape. Changes or... | |
| Reno C. King - 1948 - 990 стор.
[ Відображення вмісту сторінки заборонено ] | |
| Rodney Hitt - 1911 - 428 стор.
...outside of the casing, the flame-proof covering will not be required on the motor leads. 5. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. Joints... | |
| 1949 - 708 стор.
...machinery spaces, galley, and those exposed to weather shall be watertight. (6) Splices shall be so Joined as to be both mechanically and electrically secure without solder. They shall then be soldered and properly insulated and further protected by waterproof tape. (7) Changes... | |
| |