Пошук Зображення Карти YouTube Новини Gmail Диск Календар Більше »
Увійти
Книги Книги
" Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. "
Electric Lighting Specifications for the Use of Engineers and Architects - Сторінка 122
автори: Earle Abbott Merrill - 1892 - 176 стор.
Повний перегляд - Докладніше про цю книгу

The Texas Civil Appeals Reports: Cases Argued and Determined in the Courts ...

Texas. Court of Civil Appeals - 1909
...enacted, in substance, that live wires must have an approved weather or rubber insulating covering, and be so spliced or joined as to be both mechanically and electrically secure without solder, and the joints must then be soldered to insure preservation and covered with an insulation equal to...
Повний перегляд - Докладніше про цю книгу

Practical Operation of Arc Lamps

National Carbon Company, Inc - 1911 - 75 стор.
...Tie wires must have an insulation equal to that of the conductors which they confine. Wires must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Cyclopedia of Applied Electricity: A General Reference Work on Direct ..., Том 5

1913
...outside of the casing, the flameproof covering will not be required on the motor leads. (5) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. Joints...
Повний перегляд - Докладніше про цю книгу

Electric Railways: A Comprehensive Treatise on Modern Electric Railway ...

Henry H. Norris - 1913 - 281 стор.
...outside of the casing, the flameproof covering will not be required on the motor leads. (5) I^ust be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. Joints...
Повний перегляд - Докладніше про цю книгу

Standard Wiring for Electric Light and Power: As Adopted by the Fire ...

Harry Cooke Cushing - 1915 - 224 стор.
...^mll separate the wires at least one inch from the surface zirired over, supports to be e. Must be so spliced or joined as to be both mechanically and electrically secure without * solder (see p. 40). The joints must then be soldered, to insure preservation, and covered with an insulation...
Повний перегляд - Докладніше про цю книгу

Digest of the City of Little Rock, Arkansas

Little Rock (Ark.). - 1915 - 459 стор.
...gauge, (b) Tie wires must have an insulation equal to that of the conductors they confine, (c) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be sold«red to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Medical Electricity, Röntgen Rays and Radium: With a Practical Chapter on ...

Sinclair Tousey - 1915 - 1219 стор.
...b. (6) Tie wires must have an insulation equal to that of the conductors they confine. (c) Must be so spliced or joined as to be both mechanically and, electrically secure without solder. The joints must then be soldered to insure preservation and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

Practical Electric Wiring

John M. Sharp - 1915 - 256 стор.
...Electrical Code the requirements for wire joints and splices are as follows : (16 — C) The wires "must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered unless made with some form of approved splicing device and covered...
Повний перегляд - Докладніше про цю книгу

United States Congressional Serial Set

1916
...splices shall be fitted with water-tight junction boxes. Joints shall be so spliced or the parts so joined as to be both mechanically and electrically secure without solder. They shall then be soldered and properly insulated and further protected by waterproof tape. Changes or...
Повний перегляд - Докладніше про цю книгу

Standard Wiring for Electric Light and Power as Adopted by the Fire ...

Harry Cooke Cushing (jr.) - 1917 - 360 стор.
...from the surface wired over, supports to be placed at least every jour and one-half feet. e. Must be so spliced or joined as to be both mechanically and electrically secure without solder (see p. 50). The joints must then be soldered, to insure preservation, and covered with an insulation...
Повний перегляд - Докладніше про цю книгу




  1. Моя бібліотека
  2. Довідка
  3. Розширений пошук книг
  4. Завантажити файл PDF