Пошук Зображення Карти YouTube Новини Gmail Диск Календар Більше »
Увійти
Книги Книги
" Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. "
Electric Lighting Specifications for the Use of Engineers and Architects - Сторінка 122
автори: Earle Abbott Merrill - 1892 - 176 стор.
Повний перегляд - Докладніше про цю книгу

Storage Batteries ; Incandescent Lighting ; Arc Lighting ; Interior Wiring

1906 - 550 стор.
...in conductors must be avoided as far as possible. Where it is necessary to make them, they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a...
Повний перегляд - Докладніше про цю книгу

Electric Light Wiring

Charles Edwin Knox - 1907 - 219 стор.
...so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and...with an insulation equal to that on the conductors. All joints must be soldered, even if made with some form of patent splicing device. This ruling applies...
Повний перегляд - Докладніше про цю книгу

American Electric Railway Practice

Albert Bledsoe Herrick, Edward Carlisle Boynton - 1907 - 403 стор.
...compound. NOTE. — This rule will be interpreted to include the leads from the motors. 5. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. NOTE.—...
Повний перегляд - Докладніше про цю книгу

Electric light wiring

Charles Edwin Knox - 1907 - 219 стор.
...of glass or porcelain. Porcelain knobs or cleats and rubber hooks will not be approved. /. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that...
Повний перегляд - Докладніше про цю книгу

American Electric Railway Practice

Albert Bledsoe Herrick, Edward Carlisle Boynton - 1907 - 403 стор.
...compound. NOTE. — This rule will be interpreted to include the leads from the motors. 5. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. NOTE.—...
Повний перегляд - Докладніше про цю книгу

Compiled Ordinances of the City of St. Paul, Minnesota

Saint Paul (Minn.). - 1908 - 1245 стор.
...4o-b. b. Tie wire must have an insulation equal to that of the conductors they confine. c. Must be so spliced or joined as to be both mechanically and...must then be soldered to insure preservation, and the joint covered with an insulation equal to that on the conductors. Stranded wires must be soldered...
Повний перегляд - Докладніше про цю книгу

Modern Electrical Construction: A Reliable, Practical Guide for the Beginner ...

Henry Charles Horstmann, Victor Hugo Tousley - 1908 - 329 стор.
...taps in conductors must be avoided as far as possible. Where it is necessary to make them they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a...
Повний перегляд - Докладніше про цю книгу

Storage Batteries ; Incandescent Lighting ; Arc Lighting ; Interior Wiring ...

International Correspondence Schools - 1908 - 639 стор.
...in conductors must be avoided as far as possible. Where it is necessary to make them, they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a...
Повний перегляд - Докладніше про цю книгу

Building Code of Baltimore: Being Ordinance No. 155 of the Mayor and City ...

Baltimore (Md.) - 1908 - 306 стор.
...SolicinK of outside wires. ally and electrically secure without solder. The joints of outside wires shall then be soldered to insure preservation, and covered...with an insulation equal to that on the conductors. All joints shall be soldered, even if made with some form of patent splicing device. wb™d££!ri>1"...
Повний перегляд - Докладніше про цю книгу

Report of the Commissioner of Corporations on Transportation by Water in the ...

United States. Bureau of Corporations - 1909
...taps in conductors must be avoided as far as possible. Where it is necessary to make them they must be so spliced or joined as to be both mechanically and...secure without solder. They must then be soldered, to ensure preservation, covered with an insulating compound equal to the insulation of the wire, and further...
Повний перегляд - Докладніше про цю книгу




  1. Моя бібліотека
  2. Довідка
  3. Розширений пошук книг
  4. Завантажити файл PDF