 | 1906 - 544 стор.
...in conductors must be avoided as far as possible. Where it is necessary to make them, they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a... | |
 | Charles Edwin Knox - 1907 - 242 стор.
...so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and...with an insulation equal to that on the conductors. All joints must be soldered, even if made with some form of patent splicing device. This ruling applies... | |
 | Albert Bledsoe Herrick, Edward Carlisle Boynton - 1907 - 436 стор.
...compound. NOTE. — This rule will be interpreted to include the leads from the motors. 5. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. NOTE.—... | |
 | Charles Edwin Knox - 1907 - 336 стор.
...of glass or porcelain. Porcelain knobs or cleats and rubber hooks will not be approved. /. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that... | |
 | Albert Bledsoe Herrick, Edward Carlisle Boynton - 1907 - 424 стор.
...compound. NOTE. — This rule will be interpreted to include the leads from the motors. 5. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered and covered with an insulation equal to that on the conductors. NOTE.—... | |
 | Saint Paul (Minn.). - 1908 - 1260 стор.
...4o-b. b. Tie wire must have an insulation equal to that of the conductors they confine. c. Must be so spliced or joined as to be both mechanically and...must then be soldered to insure preservation, and the joint covered with an insulation equal to that on the conductors. Stranded wires must be soldered... | |
 | Henry Charles Horstmann, Victor Hugo Tousley - 1908 - 352 стор.
...taps in conductors must be avoided as far as possible. Where it is necessary to make them they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a... | |
 | International Correspondence Schools - 1908 - 754 стор.
...in conductors must be avoided as far as possible. Where it is necessary to make them, they must be so spliced or joined as to be both mechanically and...They must then be soldered, to insure preservation, covered with an insulating compound equal to the insulation of the wire, and further protected by a... | |
 | Baltimore (Md.) - 1908 - 514 стор.
...SolicinK of outside wires. ally and electrically secure without solder. The joints of outside wires shall then be soldered to insure preservation, and covered...with an insulation equal to that on the conductors. All joints shall be soldered, even if made with some form of patent splicing device. wb™d££!ri>1"... | |
 | United States. Bureau of Corporations - 1909 - 648 стор.
...taps in conductors must be avoided as far as possible. Where it is necessary to make them they must be so spliced or joined as to be both mechanically and...secure without solder. They must then be soldered, to ensure preservation, covered with an insulating compound equal to the insulation of the wire, and further... | |
| |
Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. 
