Зображення сторінки
PDF
ePub
[merged small][merged small][graphic][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed]

FIG. 117-MAIN TRAP AND FRESH AIR INLET CONNECTIONS, ETC..

[blocks in formation]

haps so small that when all the dimensions are placed upon it, it will be confused, and trouble the workman to work from it.

In this case it is necessary to choose a scale which will enlarge the drawing. A scale of 2 inches equal 1 inch is possibly used, and in this case, when the drawing is complete, a measurement ou it of 2 inches represents 1 inch on the piece itself.

Now, in the work which we are following, we shall have use for both the reducing and increasing scales, but more especially for the former.

In Figs. 118, 119 and 120 we show three common reducing scales, and in Fig. 121 a common increasing scale.

The double scale (Fig. 121) or 11⁄2 or triple scale, will be found of use in the practice work which we have been giving, in making an enlarged drawing from a smaller one. If there is a measurement of 11⁄2 inch on the smaller drawing, and the double scale is being used, to represent that dimension on the enlarged drawing, three inches of the double scale must be taken, that is, from 0 to 3 on Fig. 121.

The small divisions at the left of this scale represent fractions of an inch, each of the smallest divisions representing 1-16 inch, the next larger inch, the next 44 inch, and finally 1⁄2 inch.

Fig. 120 shows a scale of 1⁄2 inch equals 1 foot, and is a scale that is sometimes used, though not so often as the 4 inch and inch. The 1⁄2 inch scale will be found very handy in making a large drawing of small work, for instance, in making a good sized drawing of the plans and elevations of the plumbing for a small house. It must be understood that in Fig. 120, for instance, each figured division represents a full inch on a drawing which is drawn to a scale of inch equal 1 foot. Therefore, the full length of the scale shown would represent 14 inches, on the scale drawing, though measuring actually only half that amount.

We have chosen to consider lastly the two scales which are most important in this work, that is, the 4 and 1 inch scales shown in Figs. 118 and 119. In the next chapter these two scales will be considered fully, and examples of their application given.

[merged small][merged small][ocr errors][merged small][merged small][subsumed][merged small][merged small][graphic][subsumed][subsumed][merged small][merged small][subsumed][merged small][merged small][merged small][merged small][merged small][merged small]
[merged small][merged small][graphic][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][subsumed][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][subsumed]
[blocks in formation]

ber of different scales upon it than the flat scale. At the same time, if a flat architect's scale having a quarter and eighth scales can be procured, it will answer all purposes.

The flat scale has one great advantage over the triangular, from the fact that one often has to turn the latter several times before finding the scale desired, whereas the flat scale shows plainly at all times.

Now having looked into the subject of the different scales, let us apply it in the making of the several plans for a cottage house, this being the simplest construction that we can use for our purpose. Suppose we have a house to plan whose main dimensions are 36 feet x 24 feet. If we use a scale of 14 inch

1 foot, the

plans will appear 9 inches x 6 inches, which calls for a larger space than we can afford to give up, although if we were laying out this work on a sheet of paper rather than on the page of a publication where every inch is of value, the quarter scale for work of this kind would be far preferable. Under the conditions we are obliged to show the plans and elevation of this work on a scale of % inch 1 foot, and in much of the large work we should have to resort to a scale even smaller, probably 1-16 inch 1 foot.

The cellar plan we show in Fig. 126, and such parts of the first and second floors as contain plumbing work are shown respectively in Figs. 127 and 128. In addition to the plans, we show in Fig. 129, a very simple elevation of the work in question. This elevation is of the most rudimentary style, but it gives us as much information in the line of plumbing as an elaborate and finished elevation; all

COTTAGE HOUSE

1⁄2 in. = 1ft.

[merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small]
« НазадПродовжити »