Пошук Зображення Карти YouTube Новини Gmail Диск Календар Більше »
Увійти
Книги Книги
" 5 centimetre thick to fit the tube ; at one side of the cork bore a hole through which the zinc rod can pass tightly ; at the other side bore another hole for the glass tube which covers the platinum wire ; at the edge of the cork cut a nick through which... "
Proceedings of the Royal Society of London - Сторінка 64
автори: Royal Society (Great Britain) - 1892
Повний перегляд - Докладніше про цю книгу

Statutory Rules and Orders Other Than Those of a Local, Personal Or ...

Great Britain - 1894
...the zinc rod can pass tightly ; at the other side bore another hole for the glass tube which cavers the platinum wire ; at the edge of the cork cut a...air can pass when the cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it to soak in water for some hours before use....
Повний перегляд - Докладніше про цю книгу

Report

British Association for the Advancement of Science - 1892
...the mercury in the bottom of this tube, filling it to a depth of, say, 1'5 cm. Cut a cork about •5 cm. thick to fit the tube ; at one side of the cork...the cork is pushed into the tube. Pass the zinc rod abont 1 cm. through the cork. Clean the glass tube and platinum wire carefully, then heat the exposed...
Повний перегляд - Докладніше про цю книгу

Practical Physics

Sir Richard Glazebrook, Napier Shaw - 1893 - 633 стор.
...6 or 7 cm. deep. Place the mercury in the bottom of this tube, filling it to a depth of, say, i -5 cm. Cut a cork about 0-5 cm. thick to fit the tube...cork is pushed into the tube. Pass the zinc rod about i cm. through the cork. Clean the glass tube and platinum wire carefully, then heat the exposed end...
Повний перегляд - Докладніше про цю книгу

Transactions, Том 10

1893
...the bottom of this tube, filling it to a depth of say 1.5 cm. Cut a cork about .5 cm. thick to lit the tube ; at one side of the cork bore a hole through...air can pass when the cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it to soak in water some hours before use. Pass...
Повний перегляд - Докладніше про цю книгу

Transactions, Том 10

American Institute of Electrical Engineers - 1893
...Place the mercury in the bottom of this tube, filling it to a deptli of say 1.5 cm. Cut a cork about .5 cm. thick to fit the tube ; at one side of the cork...edge of the cork cut a nick through which the air can pa*s when the cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it...
Повний перегляд - Докладніше про цю книгу

The Electrical Engineer

1893
...'5 centimetre thick to fit the tube ; at one side of the cork bore a hole, through which the zin c rod can pass tightly ; at the other side bore another...air can pass when the cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it to soak in water for some hours before use....
Повний перегляд - Докладніше про цю книгу

Practical Physics

Sir Richard Glazebrook, Sir Napier Shaw - 1894 - 633 стор.
...the mercury in the bottom of this tube, filling it to a depth of, say, i-5 cm. Cut a cork about o-5 cm. thick to fit the tube ; at one side of the cork...cork is pushed into the tube. Pass the zinc rod about i cm. through the cork. Clean the glass tube and platinum wire carefully, then heat the exposed end...
Повний перегляд - Докладніше про цю книгу

Report of the Annual Meeting, Том 63

British Association for the Advancement of Science - 1894
...bottom of this tube, filling it to a depth of, say, 1*5 centimetre. Cut a cork about '5 centimetre thick to fit the tube ; at one side of the cork bore...can pass •when the cork is pushed into the tube. Wash the cork thoroughly with •warm water, and leave it to soak in water for some hours before use....
Повний перегляд - Докладніше про цю книгу

Elementary Lessons in Electricity & Magnetism

Silvanus Phillips Thompson - 1894 - 638 стор.
...the bottom of this tube, filling it to a depth of say 0'5 centimetre. Cut a cork about 0'5 centimetre thick to fit the tube; at one side of the cork bore...air can pass when the cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it to soak in water for some hours before use....
Повний перегляд - Докладніше про цю книгу

Report of the Annual Meeting, Том 64

British Association for the Advancement of Science - 1894
...bottom of this tube, filling it to a depth of, say, ••"> centimetre. Cut a cork about --5 centimetre thick to fit the tube ; at one side of the cork bore...cork cut a nick through which the air can pass when tlio cork is pushed into the tube. Wash the cork thoroughly with warm water, and leave it to soak in...
Повний перегляд - Докладніше про цю книгу




  1. Моя бібліотека
  2. Довідка
  3. Розширений пошук книг
  4. Завантажити файл PDF