Зображення сторінки
PDF
ePub
[blocks in formation]

Figure 39. Back of switchboard arranged for two generators and three-wire system.

The back of the switchboard.

leads from the generators come up through the floor and are made of large flexible cables. As will be noticed, all the bars are supported entirely by the connections

[graphic][subsumed][merged small][merged small]

with the switches and other devices, just as in Fig. 27. A side elevation in section is shown in Fig. 40.

Fig. 41 is a photographic view of the back of the switchboard, the front of which is shown in Fig. 42. The five large disks, seen in the back view, are the field rheostats, and by looking at Fig. 42 it will be seen that they correspond in position with the five small hand wheels located in the center panel of the board. This

As seen from the front.

board, therefore, is arranged for five generators, and the connections are upon the two-wire system, which is shown

[graphic][subsumed][subsumed][merged small]

by the fact that the switches in the two side panels are

of the two pole type.

[graphic][merged small][merged small]

Composite construction.

From Fig. 41 it will be seen that in this case, the conductors are in part bars, and in part cables, and they are not secured entirely by the bolts that form the connec

[graphic][ocr errors][subsumed][merged small][merged small]

tions with the switches, circuit breakers, etc., but are also held directly against the marble slabs. This composite construction is commonly followed when the capacity of the plant is small, but when it is sufficiently large, wires and cables cannot be used advantageously, although in

« НазадПродовжити »