 | Royal Society (Great Britain) - 1892 - 626 стор.
...some marine glue until it is fluid enough to pour by its own weight, and pour it into the test-tube above the cork, using sufficient to cover completely...the mounting so that the cell may be immersed in a water-bath up to the level of, say, the upper surface of the cork. Its temperature can then be determined... | |
 | Great Britain - 1894 - 610 стор.
...it is set, with a solution of sodium silicate, and leaving it to harden. The cell thus set up may bo mounted in any desirable manner. It is convenient...accurately than is possible when the cell is in air. In using the cell sudden variations of temperature should as far as possible be avoided. The form of... | |
 | British Association for the Advancement of Science - 1892 - 1258 стор.
...thus be nearly all expelled, and the cell should be left in this condition for at least twenty, four hours before sealing, which should be done as follows...mounting so that the cell may be immersed in a water bath np to the level of, say, the upper surface of the cork. Its temperature can then be determined more... | |
 | Royal Society (Great Britain) - 1892 - 612 стор.
...some marine glue until it is fluid enough to pour by its own weight, and pour it into the test-tube above the cork, using sufficient to cover completely...the mounting so that the cell may be immersed in a water-bath up to the level of, say, the upper surface of the cork. Its temperature can then be determined... | |
 | British Association for the Advancement of Science - 1892 - 1146 стор.
...the zinc and soldering. The glass tubs should project above the top of the marine glue. The cell thns set up may be mounted in any desirable manner. It is convenient to arrange the monnting so that the cell may be immersed in a water bath up to the level of, say, the upper surface... | |
 | 1893 - 630 стор.
...least 24 hours before sealing, which should be done as follows : Molt somo marine glue until it is Huid enough to pour by its own weight, and pour it into...accurately than is possible when the cell is in air. In using the cell, sudden variations of temperature should as far as possible be avoided. Notes. The... | |
 | 1893
...air will thus be nearly all expelled, and the cell should be left in this condition for at least 2i hours before sealing, which should be done as follows...desirable manner. It is convenient to arrange the mounting BO that the cell may be immersed in a water-bath up to the level of, say, the upper surface of the... | |
 | American Institute of Electrical Engineers - 1893 - 780 стор.
...completely the zinc and soldering. The glass tube should project above the top of the marine glue. face of the cork. Its temperature can then be determined...accurately than is possible when the cell is in air In using the cell, sudden variations of temperature should, as far as possible, be avoided. NOTES.... | |
 | Sir Richard Glazebrook, Sir W. N. Shaw - 1893 - 668 стор.
...should project above the top of the marine glue. The cell thus set up may be mounted in any desired manner. It is convenient to arrange the mounting so that the cell may be immersed in a water-bath up to the level of, say, the upper surface of the cork. Its temperature can then be determined... | |
 | British Association for the Advancement of Science - 1894 - 1272 стор.
...thus be nearly all expelled, and the cell should be left in this condition for at least twentyfour hours before sealing, which should be done as follows...the mounting so that the cell may be immersed in a water-bath up to the level of, say, the upper surface of the cork. Its temperature can then be determined... | |
| |
It is convenient to arrange the mounting so that the cell may be immersed in a water bath up to the level of, say, the upper surface of the cork. Its temperature can then be determined more accurately than is possible when the cell is in air. In using... 
