 Then insert the cork and zinc rod, passing the glass tube through the hole prepared for it. Push the cork gently down until its lower surface is nearly in contact with the liquid. The air will thus be nearly all expelled, and the cell should be left in...  Practical Physics - Сторінка 575автори: Sir Richard Glazebrook, Sir W. N. Shaw - 1893 - 663 стор.Повний перегляд - Докладніше про цю книгу
 | 1891 - 680 стор.
...Snake up the paste, and introduce it without contact with the upper part of the walls of the test tube, filling the tube above the mercury to a depth of rather...cell should be left in this condition for at least 24 hours before sealing, which should be done as follows. Melt some marine glue until it is fluid enough... | |
 | Great Britain - 1894 - 610 стор.
...walls cf the test tube, filling the tube above the mercury to a depth of rather more than 1 centimeter. Then insert the cork and zinc rod, passing the glass...cell should be left in this condition for at least 24 hours before sealing, which should be done as follows : — Melt some marine glue until it is fluid... | |
 | British Association for the Advancement of Science - 1892 - 1258 стор.
...Shake up the paste and introduce it without contact with the upper part of the walls of the test tube, filling the tube above the mercury to a depth of rather...cell should be left in this condition for at least twenty, four hours before sealing, which should be done as follows : — Melt some: marine glue until... | |
 | Royal Society (Great Britain) - 1892 - 612 стор.
...platinum is covered. Shake up the paste and introduce it without contact with the upper part of the walU of the test-tube, filling the tube above the mercury...The air will thus be nearly all expelled, and the coll should be left in this condition for at least twenty-four hours before scaling, which should be... | |
 | British Association for the Advancement of Science - 1892 - 1146 стор.
...Shake up the paste and introduce it without contact with the upper part of the walls of the test tube, filling the tube above the mercury to a depth of rather...through the hole prepared for it. Push the cork gently dowu until its lower surface is nearly in contact with the liquid. The air will thus be nearly all... | |
 | American Institute of Electrical Engineers - 1893 - 780 стор.
...Shake up the paste and introduce it without contact with the upper part of the walls of the test tube, filling the tube above the mercury to a depth of rather...cell should be left in this condition for at least 24 hours before sealing, which should be done as follows : — Melt some marine glue until it is fluid... | |
 | 1893
...the paste and introduce it without contact with the upper part of the walls of the test tube, tilling the tube above the mercury to a depth of rather more...cell should be left in this condition for at least 2i hours before sealing, which should be done as follows : — Melt some marine glue until it is fluid... | |
 | 1893 - 630 стор.
...of the test tube, filling the tube above the mercury to a depth of rather more than two centimetres. Then insert the cork and zinc rod, passing the glass...The air will thus be nearly all expelled, and the coll should be left in this condition for at least 24 hours before sealing, which should be done as... | |
 | Silvanus Phillips Thompson - 1894 - 666 стор.
...walls of the test tube, filling the tube above the mercury to a depth of rather more than 1 centimetre. Then insert the cork and zinc rod, passing the glass...cell should be left in this condition for at least 24 hours before sealing, which should be done as follows : Melt some marine glue until it is fluid... | |
 | Silvanus Phillips Thompson - 1894 - 648 стор.
...walls of the test tube, filling the tube above the mercury to a depth of rather more than 1 centimetre. Then insert the cork and zinc rod, passing the glass...nearly in contact with the liquid. The air will thus he nearly all expelled, and the cell should he left in this condition for at least '24 hours before... | |
| |
