Steam Engine Troubles, a Practical Treatise for the Engineer, Telling how to Locate and Remedy Troubles with a Steam Engine ...

Передня обкладинка
Norman W. Henley publishing Company, 1919 - 284 стор.

Відгуки відвідувачів - Написати рецензію

Не знайдено жодних рецензій.

Інші видання - Показати все

Загальні терміни та фрази

Популярні уривки

Сторінка 35 - Saw Filing and Management of Saws. By ROBERT GRIMSHAW. A practical hand-book on filing, gumming, swaging, hammering, and the brazing of band saws, the speed, work, and power to run circular saws, etc. A handy book for those who have charge of saws, or for those mechanics who do their own filing, as it deals with the proper shape and pitches of saw teeth of all kinds and gives many useful hints and rules for gumming, setting, and filing, and ie a practical aid to those who use saws for any purpose.
Сторінка 17 - ELECTRIC FURNACES AND THEIR INDUSTRIAL APPLICATIONS. By J. WRIGHT. This is a book which will prove of interest to many classes of people; the manufacturer who desires to know what product can be manufactured successfully in the electric furnace, the chemist who wishes to post himself on the electro-chemistry, and the student of science who merely looks into the subject from curiosity.
Сторінка 24 - Turning and Boring Tapers. By FRED H. COLVIN. There are two ways to turn tapers; the right way and one other. This treatise has to do with the right way; it tells you how to start the work properly, how to set the lathe, what tools to use and how to use them, and forty and one other little things that you should know.
Сторінка 20 - This book has been prepared with special reference to the generation of heat by the combustion of the common fuels found in the United States and deals particularly with the conditions necessary to the economic and smokeless combustion of bituminous coal in Stationary and Locomotive Steam Boilers.
Сторінка 29 - Mechanical Appliances, Mechanical Movements and Novelties of Construction. By GARDNER D. Hiscox. This is a supplementary volume to the one upon mechanical movements. Unlike the first volume, which is more elementary in character, this volume contains illustrations and descriptions of many combinations of motions and of mechanical...
Сторінка 24 - Written by a man who knows, not only how work ought to be done, but who also knows how to do it, and how to convey his knowledge to others.
Сторінка 17 - ... explanations of the power factor, conditions calling for various sizes of wire, and a simple way of obtaining the sizes for single-phase, two-phase and three-phase circuits. This is the only complete work issued showing and telling you what you should know about direct and alternating current wiring. It is a ready reference. The work is free from advanced technicalities and mathematics, arithmetic being used throughout. It is in every respect a handy, well-written, instructive, comprehensive...
Сторінка 23 - HYDRAULICS HYDRAULIC ENGINEERING. By GARDNER D. Hiscox. A treatise on the properties, power, and resources of water for all purposes. Including the measurement of streams, the flow of water in pipes or conduits; the horse-power of falling water, turbine and impact water-wheels, wave motors, centrifugal, reciprocating and air-lift pumps.
Сторінка 12 - Molding and Curing Ornamental Concrete. By AA HOUGHTON. The proper proportions of cement and aggregates for various finishes, also the method of thoroughly mixing and placing in the molds, are fully treated. An exhaustive treatise on this subject that every concrete worker will find of daily use and value. (No. 5 of Series.) P«ce 50 cents Concrete Monuments, Mausoleums and Burial Vaults.
Сторінка 28 - Cyclopedia is admirably well adapted to the needs of the beginner and the self-taught practical man, as well as the mechanical engineer, designer, draftsman, shop superintendent, foreman, and machinist.

Бібліографічна інформація