 This is supported horizontally in the liquid near the top of the solution by a platinum wire passed through holes in the plate at opposite corners. To prevent the disintegrated silver which is formed on the anode from falling on to the kathode, the anode...  The Electrical Engineer - Сторінка 3041893Повний перегляд - Докладніше про цю книгу
 | 1895 - 1104 стор.
...of pure silver some 30 square centimeters in area and 2 or 3 millimeters in thickness. This shall be supported horizontally in the liquid near the top of the solution by a silver rod riveted through its center. To prevent the disintegrated silver which is formed on the anode... | |
 | National Academy of Sciences (U.S.) - 1888 - 840 стор.
...of pure silver some 30 square centimeters in area and 2 or 3 millimeters in thickness. This shall be supported horizontally in the liquid near the top of the solution by a silver rod riveted through its center. To prevent the disintegrated silver which is formed on the anode... | |
 | Great Britain - 1894 - 610 стор.
...a plate of pure silver some 30 square centimetres in area and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid near the top...which is formed on the anode from falling on to the kathode, the auode should be wrapped round with pure filter paper, secured at the buck with sealing... | |
 | 1891 - 680 стор.
...should be a plate of pure silver some 30 square centimetres area and 2mm. or 3 mm. in thickness. This is supported horizontally in the liquid near the top of the solution by a platinum 'A ire (tossed through holes in the plates at opposite corners. To prevent the disintegrated silver... | |
 | British Association for the Advancement of Science - 1892 - 1146 стор.
...should be a plate of pure silver some 30 square cm. in area> and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid near the top...which is formed on the anode from falling on to the kathode, the anode should be wrapped round1 with pure filter paper, secured at the back with sealing... | |
 | British Association for the Advancement of Science - 1892 - 1258 стор.
...should be a plate of pure silver some 30 square cm. in area and 2 or 3 millimetres in thickness. This is supported horizontally in the liquid near the top...which is formed on the anode from falling on to the kathode, the anode should be wrapped round with pure filter paper, secured at the back with sealing... | |
 | 1892 - 644 стор.
...area and 2 or 3 mm. in thickness. " This is supported horizontally in the liquid near the top of (he solution by a platinum wire passed through holes in...opposite corners. To prevent the disintegrated silver from the anode from falling on the kathode, the anode should be wrapped around with pure filter paper... | |
 | Sir Richard Glazebrook, Sir W. N. Shaw - 1893 - 668 стор.
...anode should be a plate of pure silver, some 30 sq. cm. in area, and 2 or 3 mm. in thickness. This is supported horizontally in the liquid near the top...which is formed on the anode from falling on to the kathode, the anode should be wrapped round with pure filter-paper, secured at the back with sealing-wax.... | |
 | American Institute of Electrical Engineers - 1893 - 780 стор.
...a plate of pure silver, some 30 square cm. in area, and two or three millimetres in thickness. This is supported horizontally in the liquid near the top...disintegrated silver which is formed on the anode from falling onto the cathode, the anode should be wrapped around with pure filter paper, secured at the back with... | |
 | 1893
...a plate of pure silver, some 30 square cm. in area, and two or three millimetres in thickness. This is supported horizontally in the liquid near the top...disintegrated silver which is formed on the anode from falling onto the cathode, the anode should be wrapped around with pure filter paper, secured at the back with... | |
| |
