Зображення сторінки
PDF
ePub

54. Dynamo(s). A dynamo capacity of, as nearly as possi

bile, --, --- c. p. incandescent lamps. (The number of dynamos shall not be less than --, nor more than ––.)

T'he dynamo(s) shall be of the latest and most efficient pattern; shall be mounted upon a base provided with an adjustable belt tightener so that the helt may be tightened while in operation; capable of operating under full load for -- consecutive hours without increasing the temperature of any part, especially the armature, fields, and commutator, to such a degree as to endanger the insulation or decrease the efficiency of operation; shall not spark appreciably with proper care of the commutator and adjustment of the brushes, nor under considerable variation of the load; shall have an insulation resistance of not less than -- ohms between all parts insulated from each other; shall be adapted to operate at such speed as will allow the use of high-speed, automatic cut-off engines belted direct; shall be provided with efficient oiling devices; the armature shall be balanced electrically and mechanically so that there will be no tendency to spring the shaft, or to draw the armature toward either bearing so as to cause excessive friction and heating, and no vibration; all contacts, binding posts, brushes, etc., having considerable differences of potential between them shall be so placed and protected that the danger of receiving a shock is the least possible; arma

ture conductors shall be so securely attached to the surface of the armature as to preclude any possibility of their being dragged from their proper position under normal conditions of operation; all coils, connections, commutators, brushes, etc., belonging to different circuits shall be so insulated and protected that it will be impossible under the ordinary conditions of operation to cross or ground them; the dynamo(s) shall be so designed that the power required will be automatically proportioned to the number and candle power of the lamps burning at any time; and shall be rated with such margin of safety that

ot s they

will

w

Tit not be injured if subjected to a temporary overload of -- per cent. above itser | normal rating; if (an)auxiliary dynamo(s) )

Sare

Tiss required for the operation of the dynamo(s)

y { shall be subject to

lits the same conditions.

specified above

they

[ocr errors]

65. Founda

tions.

(See Note: p. 44, sec. 22.)
The foundation(s) for the(se) dynamo(s)

Scontractor ļ shall be built by the purchaser

of --, laid --, or of other material subject to the

mi į and shall be of

architect, s sufficient length, width, and depth to safely

approval of the

engineer, ,

and firmly sustain

in Stheir , we

the weight. For dynamos operating at voltages below -- the baseframe may be firmly and securely fastened directly on the foundation. For dynamos operating at voltages above —the foundation shall be capped with a framing of well seasoned timber securely fastened thereto, the baseframe being securely fastened to the framing or to the foundation through the framing; both framing and baseframe being secured in such a manner as to prevent lateral motion in either direction, and to give an even bearing surface at every point.

If metal is used to fasten framing or baseframe to the foundation it shall be thoroughly insulated where it passes through them, and at all places liable to come in contact with the dynamo shall be countersunk and covered with a moisture-proof insulating compound.

All necessary excavating and filling, and the removal of all débris shall be done by the scontractor. Th

The height of the dynamo 7 purchaser. Ši baseframe(s) above the ground will be -

[blocks in formation]

(See Note: p. 45, sec. 23.)

There shall be provided with each dynamo one hand regulator for adjusting the pressure, made entirely of incombustible material; one ampère meter for indicating the current supplied by the dynamo; one voltmeter or pressure indicator, which shall remain constantly in circuit so as to indicate continuously the pressure at the point to which it is connected, and shall be so constructed that the scale is plainly visible at a distance of at least ——; one insulating baseframe provided with rails and a suitable device for shifting the position of the dynamo to alter the belt tension; there shall be provided for the installation one ground detector, or if the circuits have no common junction one ground detector for each circuit, which skall continuously indicate the insulation from the ground maintained on both sides throughout the system, and one pair of efficient lightning arresters for the common circuits, or for each circuit if they are kept separate; there shall also be provided such brush jigs, switches, cut-outs, belts and other appliances as are requisite and proper in the operation of the system and would be found in a correct installation; switches and cut-outs to be double pole and mounted on incombustible bases; belts to be endless and capable of transmitting the power required safely and efficiently.

For alternating systems there shall be pro-57.Converters. vided the following numbers and sizes of converters: Number. Sizes.

- lt. etc.

etc.

Switchboard.

-58. Cables to (See Note: p. 45, sec. 24.)

This contractor shall carry to the switchboard location at -- all regulator, exciter, auxiliary, and main wires, leaving the ends coiled up neatly, properly tagged, and sufficiently long to make the necessary switchboard connections. All main wires shall have a capacity of at least —- C. M. per ampère, and no wire smaller than -- B. & S. orB. W. G. shall be used. All regulator, exciter, and for systems carrying over —— volts all auxiliary and main wires, shall be insulated with ——; all wires of systems carrying over -- volts shall be run --; where of opposite polarity shall be separated at least ——; and where crossing each other, wires of other circuits or passing near metal pipes, girders, etc., shall be further protected by ---,

For systems carrying less than -- volts the main wires shall be of

S bare copper wire supported

on porcelain insulators.
( carefully cleated to the

ceiling,

carried on porcelain ininsulated wire

sulators, concealed in a molding

consisting of a back

ing -- thick and a

l capping —- thick wires of opposite polarity being separated not less than -

In no case shall insulated wires be carried in such proximity to heated surfaces, vapors, or air as to endanger their insulation.

« НазадПродовжити »