Зображення сторінки

tion bolts and washers, sight feed cylinder lubricator, throttle valve, sight feed oil cups, full set of wrenches, governor pulley, driving pulley of proper dimensions for driving the dynamo selected (and all necessary pipes, valves, reducing motion and attachments for taking indicator cards.

Indicators to be furnished by the purchaser.)

(Note.—If the dynamo(s) { ise { to be direct driven by the engine(s) there should be added to the above specification the type or types of dynamo(s) which may be selected from; the method of connecting engine(s) and dynamo(s); and any special fittings such as extension to engine foundation box, extended shaft, out board bearing, spot for supporting fields, attachment for securing brush-holder, etc.)

(As required.)

203. Painting.

204. Founda


204. Founda: The foundation(s) for the(se) engine(s) shall be built by the contractor lo

purchaser of — , laid — , and shall be of sufficient length, width and depth to safely and firmly sustain their , tain itse { weight and all strains to


[ocr errors]

which they are subjected. All neces

7 it is sary excavating or filling and the removal of all debris shall be done by the I contractor. I the foundations shall be 7 purchaser. 5 of such height that the driving pulley(s) will swing will swing / below

clear of the floor —


(Note.--Foundations for direct-connected outfits should extend under both engine and dynamo.)

(Character of the soil should also be specified, and the method of isolating and insulating the foundation if required.)

205. Starting Plant and In


(Note.-If this contractor furnishes 205. plant complete, this section can be put before final summary.)

I engine(s) /
When the eng

Sare ţ ready
the plant is re
for operation they shall be run for a
period of — days by competent en.
gineers furnished by the contractor.
| Assistant Engineer, \ oil, waste, etc.,
7 Fireman,
will be furnished by the purchaser).

This contractor shall also give all necessary instructions to the engineer of (the purchaser) for the proper care, maintenance, and operation of the 1 engine(s), hance, and operation 01 Uno 7 plant. I such instructions to be given during the trial period stipulated above. í double leather, endless, solid)

66 66


(rope, etc.,

206 Belts.


free from defects of any kind, — in width by — in length, and capable of transmitting — horse-power at a belt speed of —


207. Renewal Such renewal parts as it is advisable to

keep on hand, adding hereto an itemized list of same.

208. Summary. (See Note: p. 52, sec. 27.)

Each bidder shall fill out completely
the following summary:
Number of engines ...
Size of cylinder(s) . . . .
Diameter of steam pipe . ..
Diameter of exhaust pipe
Floor space . . . . . . . -
Indicated horse-power at- revo-

lutions, initial steam pres-
sure, — back pressure, cut-

ting off at — stroke. . . Speed . . . . . . . . . Maximum variation in speed be

tween no load and full loadNumber of pulleys . . . .

209. Counter


bolts, etc.


[ocr errors]

Dimensions of pulleys ....

( turned steel,
of hammered iron, { shafting -

( etc., in diameter.

[floor stands,
drop hangers, į complete with
post hangers, 7

pedestals, etc.,)
adjustable, (self-oiling) boxes, base-plates,
bolts eto Height from floor l in

m 1 ceiling $ centre line of shaft

Shafting to be key-seated for the pulleys specified below, and provided with all necessary collars, guard rings, etc. plain cast iron, )

210. Pulleys. split or " plain wood, pulleys accursplit "

| grooved, etc. ately bored, turned, balanced, and provided with key seats and keys. Pulleys to be — in diameter by —— face, and capable of transmitting —- horse-power at - revolutions.

- , arm, balanced friction-clutch pulleys, — in diameter by - face,

« НазадПродовжити »