Зображення сторінки
PDF
ePub

tion bolts and washers, sight feed cylinder lubricator, throttle valve, sight feed oil cups, full set of wrenches, governor pulley, driving pulley of proper dimensions for driving the dynamo selected (and all necessary pipes, valves, reducing motion and attachments for taking indicator cards.

Indicators to be furnished by the pur

[blocks in formation]

direct driven by the engine(s) there should be added to the above specification the type or types of dynamo(s) which may be selected from; the method of connecting engine(s) and dynamo(s); and any special fittings such as extension to engine foundation box, extended shaft, out board bearing, spot for supporting fields, attachment for securing brush-holder, etc.)

(As required.)

203. Painting.

204. Foundations.

The foundation(s) for the(se) engine(s)

shall be built by the {contractor (

of

laid, and shall be of sufficient length, width and depth to safely and firmly sustheir weight and all strains to

tain

{

which

its

they are

it is

subjected. All neces

sary excavating or filling and the removal
of all debris shall be done by the
J contractor.
purchaser.

The foundations shall be

of such height that the driving pulley(s)

will swing { clear of } the floor

(Note.-Foundations for direct-connected outfits should extend under both engine and dynamo.)

(Character of the soil should also be specified, and the method of isolating and insulating the foundation if required.)

(Note.-If this contractor furnishes 205. Starting

plant complete, this section can be put

Plant and Instruction.

before final summary.)

[blocks in formation]

will be furnished by (the purchaser).

This contractor shall also give all necessary instructions to the engineer of (the purchaser) for the proper care, mainte

nance, and operation of the

engine(s),

[ocr errors]

such instructions to be given during the

trial period stipulated above.

double leather, endless, solid |

66

66

66

forated

link
rubber

cotton-leather

rope, etc.,

per

belts

206 Belts.

207. Renewal Parts.

208. Summary.

free from defects of any kind,

in

width by in length, and capable of horse-power at a belt

transmitting

speed of

Such renewal parts as it is advisable to keep on hand, adding hereto an itemized list of same.

(See Note: p. 52, sec. 27.)

Each bidder shall fill out completely the following summary:

[merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][merged small][ocr errors][merged small]

Maximum variation in speed be

tween no load and full load

[merged small][ocr errors][merged small]
[merged small][ocr errors][merged small][ocr errors][ocr errors][merged small][merged small][merged small][merged small][merged small]

adjustable, (self-oiling) boxes, base-plates,

bolts, etc.

J Height from{ floor

Drop

centre line of shaft

to

Shafting to be key-seated for the pulleys specified below, and provided with all necessary collars, guard rings, etc.

[blocks in formation]

ately bored, turned, balanced, and pro

vided with key seats and keys. Pulleys

[blocks in formation]

209. CounterShafting.

210. Pulleys.

« НазадПродовжити »