tion bolts and washers, sight feed cylinder lubricator, throttle valve, sight feed oil cups, full set of wrenches, governor pulley, driving pulley of proper dimensions for driving the dynamo selected (and all necessary pipes, valves, reducing motion and attachments for taking indicator cards. Indicators to be furnished by the pur direct driven by the engine(s) there should be added to the above specification the type or types of dynamo(s) which may be selected from; the method of connecting engine(s) and dynamo(s); and any special fittings such as extension to engine foundation box, extended shaft, out board bearing, spot for supporting fields, attachment for securing brush-holder, etc.) (As required.) 203. Painting. 204. Foundations. The foundation(s) for the(se) engine(s) shall be built by the {contractor ( of laid, and shall be of sufficient length, width and depth to safely and firmly sustheir weight and all strains to tain { which its they are it is subjected. All neces sary excavating or filling and the removal The foundations shall be of such height that the driving pulley(s) will swing { clear of } the floor (Note.-Foundations for direct-connected outfits should extend under both engine and dynamo.) (Character of the soil should also be specified, and the method of isolating and insulating the foundation if required.) (Note.-If this contractor furnishes 205. Starting plant complete, this section can be put Plant and Instruction. before final summary.) will be furnished by (the purchaser). This contractor shall also give all necessary instructions to the engineer of (the purchaser) for the proper care, mainte nance, and operation of the engine(s), such instructions to be given during the trial period stipulated above. double leather, endless, solid | 66 66 66 forated link cotton-leather rope, etc., per belts 206 Belts. 207. Renewal Parts. 208. Summary. free from defects of any kind, in width by in length, and capable of horse-power at a belt transmitting speed of Such renewal parts as it is advisable to keep on hand, adding hereto an itemized list of same. (See Note: p. 52, sec. 27.) Each bidder shall fill out completely the following summary: Maximum variation in speed be tween no load and full load adjustable, (self-oiling) boxes, base-plates, bolts, etc. J Height from{ floor Drop centre line of shaft to Shafting to be key-seated for the pulleys specified below, and provided with all necessary collars, guard rings, etc. ately bored, turned, balanced, and pro vided with key seats and keys. Pulleys 209. CounterShafting. 210. Pulleys. |