his own repairs and enumerate the most important of the tools necessary in automobile repairing and the supplies most generally used in restoring defective mechanism. It is not possible to enumerate all tools that can be used to advantage as their number is legion. However, selections of those needed can be made from the lists for the regular tool equipment and can be augmented as conditions dictate. The wider the range of work the shop is to attempt, the more complete the tool and supply stock must be.

TOOLS FOR THE REPAIR SHOP.

HAMMERS:

Blacksmith's hammer-41⁄2 lb. head.

Blacksmith's sledge-10 lb. head, short handle.

Blacksmith's sledge-20 lb. head, long handle.

Machinist's ball pein hammers-1 lb. head, 2 lb. head.
Machinist's ball pein hammers-1⁄2 lb. head.

Machinist's straight pein hammers-4 oz. head.

Wooden or Rawhide Mallet.

Lead or Babbitt hammer.

WRENCHES:

Ratchet Handle Socket Wrench Set.

Six-inch Stillson wrench.

Twelve-inch Stillson wrench.

Eighteen-inch Stillson wrench.

Six-inch Coes or other monkey wrench.
Twelve-inch Coes or other monkey wrench.
Eighteen-inch Coes or other monkey wrench.
Set of double end S wrenches.

Assorted Spanner wrenches.

Bicycle wrench, small 4 inches.

Narrow jaw monkey wrench, 8 inches.

Bemis and Call Adjustable end wrench, 6 inches.
Bemis and Call Adjustable end wrench, 8 inches.
Spark plug socket wrench.

Small hand vise.

PLIERS, ETC.:

Combination pliers, 6 inches, 10 inches.
Side cutting, parallel jaw pliers.

PLIERS, ETC.-Continued:

Special anti-skid chain pliers.

Tire casing cut repair piiers.
Cotter pin-pliers.

Piston ring expanding pliers.
Tinner's snips.
Heavy shears.

Bolt cutter.

SCREW DRIVERS:

Jeweler's small screw driver.

Six-inch screw driver, 4-inch width blade.
Ten-inch screw driver, 3-inch width blade.
Twelve-inch screw driver, 2-inch blade.
T handle “Bulldog' screw driver.

MISCELLANEOUS TOOLS:

Wheel pullers, valve spring lifters, etc.

Breast drill, two-speed.

Valve seat reamers, valve head truing cutters.

Hand drill, one-speed.

Belt punch.

Bit brace, ratchet and bits.

Carpenter's cross cut saw.

Hacksaw frame and extra saws for tubing and bar stock.

Ratchet drill set.

Gasoline blow torch.

Spring winder, chassis spring spreader.

Scrapers (carbon).

Scrapers (bearing).

Jack plane and wood chisels.

Set of number drills.

Wire scratch brush, putty knife.

Set of taps and dies-S. A. E. standard.

Set of taps and dies-metric standards (foreign).
Set of taps and dies-American standard.
Soldering irons-large, medium and small.
Set of straight and taper hand reamers.

FILES, ETC.:

Twelve-inch bastard cut, flat.

Twelve-inch bastard cut, half round.

FILES, ETC.-Continued:

Ten-inch bastard cut, round.
Ten-inch bastard cut, square.
Ten-inch bastard cut, three-cornered.
Eight-inch second cut, flat.

Eight-inch second cut, half round.

Eight-inch finishing cut, flat.

Eight-inch finishing cut, half round.
Eight-inch finishing cut, rat tail.
Eight-inch finishing cut, three-cornered.
Six-inch finishing cut, flat.

Six-inch finishing cut, rat tail.

Set of file handles and file brush.

Small and large oil stones.

CHISELS, ETC.:

Cape chisels-small, medium and large.

Chipping chisels-small, medium and large.

Round nose chisels-small, medium and large.

Diamond point chisels-small, medium and large.

Center punches-small, medium and large.

Drift pins-16, 8, 16, 4, 16, %, 2, % and 4-inch point.
Cotter pin puller.

Set of straight and offset scribers.

MEASURING TOOLS:

Carpenter's and machinist's tri-squares-small six-inch, large twentyfour inch.

Machinist's twelve-inch flexible scale, six-inch scale, 2-inch scale.
Carpenter's two-foot folding rule.

Caliper rule.

Combination square and protractor, 18-inch scale.

Spirit level, cross level.

External micrometers, one, two, three and 6-inch with extension pieces. Internal micrometer, with extension pieces.

Thread gauge.

Hermaphrodite calipers-small, medium and large.

Small internal calipers.

Large internal calipers.

Small external calipers.

Large external calipers.

Spring dividers, small and medium.

Friction joint dividers, large.

BENCH EQUIPMENT:

Medium size pipe vise.

Large swivel vise.

Medium swivel vise.

Surface plate.

Small bench anvil.

Machinist's clamps.

C clamps-large, medium and small.
Straight edge and surface gauge.

Pyrene fire extinguisher.

Angle bender.

ELECTRICAL EQUIPMENT

Extension lamps with wood handle and steel cage.

Electric breast drill.

Storage battery charging means; Rheostat, lamps or rectifier. Still for making pure water.

Voltmeter for testing storage batteries.

Ammeter for testing dry cells.

Hydrometers and hydrometer syringes.

Acid bottles and electrolyte crocks.

Extra strap connections, wing nuts and lead bolts.

Torch for lead burning.

TIRE REPAIR MATERIAL

Vulcanizer for casings.

Molds for same.

Vulcanizer for tubes.

Acid cure or cold vulcanizing set.

Stock outfit for vulcanizing and patching, rubber, canvas, etc.

Rubber cements, cut fillers, etc.

Air-compressor outfit.

Jacks, two of each size, large, medium.

Tire irons, special rim tools.

Valve tools, air pressure gauge.

Extra valves and valve parts.

Casing air bags or coil springs for use when vulcanizing.

Inner tube patches, inside and outside casing blowout sleeves.

REPAIR SHOP FURNITURE

Movable and wall benches.

Wheeled trucks, special jacks, trestles, etc.
Oil separator and filter.

Sixty-gallon oil tanks, with pumps.

Small tanks for kerosene, alcohol, cutting oil, etc.
Gasoline storage system, 100 gallons or larger.
Oil cans, oil and grease guns.

Covered cans for waste, oily rags, and rubbish.
Pails of sand and chemical extinguishers for fire.
Overhead washer, hose and faucets.

Washing materials, soaps, sponges, chamois, etc.
Water heater.

Potash kettle, babbitt melting pot.
Drains, traps, etc., according to law.
Lightstand for night work on cars.
Block and tackle, chain hoists, etc.
Overhead trolley track or portable crane.
Turntable or substitute.

Steel or wooden lockers.

Oil drip pans for floors.

Dustbrush, floor broom, whisk broom.

Water pails, quart and gallon measures, funnels.
Brazing forge.

Autogenous welding outfit.

Carbon-removing outfit.

Blacksmith's forge and blower.

Post drill press and drills.

Five hundred pound anvil and block.
Quenching tank, forge coal box.

REPAIR SHOP SUPPLIES

CLASS A-HARDWARE STOCK.

Round cold-rolled steel rods, 14, 16, %, 1⁄2 inch.
Round machinery steel bars, %, 4, %, 1, 14 inch.
Flat band iron and steel, assorted sizes as needed.

Drill rod, assorted sizes.

Black sheet iron, sheet brass and copper, assorted gauges.

Tinned and galvanized iron sheets.

Tool steel, for lathe and planer tools.