Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that on the conductors. Electric Lighting Specifications - Сторінка 171автори: Earle Abbott Merrilol - 1896 - 213 стор.Повний перегляд - Докладніше про цю книгу
| 1891 - 680 стор.
...with petticoat insulators of glass or porcelain. Porcelain knobs and rubber hooks are prohibited. 7. So spliced or joined as to be both mechanically and...secure without solder. They must then be soldered to ensure preservation, and covered with an insulation equal to that on the conductors. The following... | |
| Frank Eugene Kidder - 1892 - 1032 стор.
...partitions through which they may pass, by non-combustible insulating tube or hard rubber tube. (g) Must be so spliced or joined as to be both mechanically...with an insulation equal to that on the conductors. LAMPS AND OTHER DEVICES. 1 3. Arc Lamps. — In every case : (a) Must be carefully isolated from inflammable... | |
| Earle Abbott Merrill - 1892 - 188 стор.
...with petticoat insulators of glass or porcelain. Porcelain knobs and rubber hooks are prohibited. 7. So spliced or joined as to be both mechanically and...with an insulation equal to that on the conductors. The following formula for soldering fluid is approved: Saturated solution of zinc . . 5 parts. Alcohol... | |
| National Electric Light Association. Convention - 1892 - 458 стор.
...with petticoat insulators of glass or porcelain. Porcelain knobs and rubber hooks are prohibited. 7. So spliced or joined as to be both mechanically and...with an insulation equal to that on the conductors. The following formula for soldering fluid is approved : Saturated Solution of Zinc 5 parts. Alcohol... | |
| Frank Eugene Kidder - 1892 - 1058 стор.
...insulators of glass or porcelain. Porcelain knobs or cleats and rubber hooks will not be approved. (/) Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered, to insure preservation, and covered with an insulation equal to that... | |
| Charles M. Davis - 1893 - 162 стор.
...insulators of glass or porcelain. Porcelain knobs or cleats and rubber hooks will not be approved. f. Must be so spliced or joined as to be both mechanically and electrically secure without solder. The joints must then be soldered to insure preservation, and covered with an insulation equal to that... | |
| 1894 - 622 стор.
...petticoat insulators of glass or porcelain. Porcelain knob«, cleat« and rubber hooks are prohibited. 7. Must be so spliced or joined as to be both mechanically...with an insulation equal to that on the conductors. 1 . Adopted at the Washington Convention, March 1, 1894. NOTB.— These Rulea are subject to amendment«... | |
| Russell Robb - 1896 - 208 стор.
...air-space will be left between conductors and pipes in crossing, and the former must be run in such a way that they cannot come in contact with the pipe accidentally....with an insulation equal to that on the conductors. [Section /. All joints must be soldered, even if made with the Mclntyre or any other patent splicing... | |
| George H. Kimber - 1896 - 80 стор.
...pipes upon which moisture is likely to gather, or which by leaking might cause trouble on a circuit. e. Must be so spliced or joined as to be both mechanically...with an insulation equal to that on the conductors. All joints must be soldered, even if made with the Mclntyre or any other patent splicing device. This... | |
| Nehemiah Hawkins - 1896 - 568 стор.
...through which (.hey may pass by non, combustible insulating tube. WIRING RULES AND REQUIREMENTS. g. Must be so spliced or joined as to be both mechanically...with an insulation equal to that on the conductors. 13. ARC LAMPS— IN EVERY CASE : a. Must be carefully isolated from inflammable material. b. Must be... | |
| |