Integrated Logistics Support Handbook

Передня обкладинка
McGraw Hill Professional, 30 черв. 2010 р. - 528 стор.

All the ILS expertise needed to achieve a more supportable system and cost-effective support infrastructure

Engineers and managers can turn to the updated Third Edition of Integrated Logistics Support Handbook for expert guidance on applying Integrated Logistics Support (ILS) for acquisition and procurement planning in new product development. Long-established as the definitive ILS resource, this handbook distills thousands of pages of directives, instructions, and related material into a coherent, one-stop reference that can be used to enhance any military or commercial project. The Third Edition features new information on reliability and maintainability engineering...testability...supportability engineering...cost of ownership...personnel...support equipment...training...technical documentation...level-of-repair analysis...software support...life-cycle cost...logistics plans...contracts...and much more.

Filled with step-by-step guidelines and 300 illustrations, the updated Integrated Logistics Support Handbook explains how to:

  • Apply MIL HDBK 502, Acquisition Logistics
  • Meet the requirements of MIL-PRF 49506, Logistics Management Information
  • Develop and measure Performance-Based Logistics requirements
  • New to this edition: applications of ILS to software-based systems, applications to commercial off-the-shelf solutions, and the latest Department of Defense requirements
  •  

    Відгуки відвідувачів - Написати рецензію

    Не знайдено жодних рецензій.

    Зміст

    Developing the Support Solution
    12-41
    Logistics Management
    22-21
    Appendix A Roadmaps to Success
    25-17
    Appendix B Joint Service Multiple Role Tactical Armored Vehicle Program JTAV
    B-1
    Appendix C References
    B-11
    Appendix D Abbreviations and Acronyms
    D-1
    Index
    1
    Авторські права

    Інші видання - Показати все

    Загальні терміни та фрази

    Популярні уривки

    Сторінка 4-27 - a design characteristic which allows the status (operable, inoperable, or degraded) of an item to be determined and the isolation of faults within the item to be performed in a timely manner.
    Сторінка 8-1 - ... item to find and correct any potential failures; (2) Rework/remanufacture/overhaul of an item at or before some specified time or age limit; (3) Discard of an item (or parts of it) at or before some specified life limit; and (4) Failure finding inspections of a hiddenfunction item to find and correct functional failures that have already occurred but were not evident to the operating crew. (b) Components or systems in a reliabilitybased maintenance program may be defined as simple or complex....
    Сторінка 7-15 - Weight (kg) 5th percentile Ground troops Percentile values in centimeters Aviators Women 95th percentile Ground troops Aviators Women Standing body dimensions 1. Stature 2. Eye height (standing) 3. Shoulder (acromiale) height 4. Chest (nipple) height* 5. Elbow (radiale) height 6. Fingertip (dactylion) height 7. Waist height 8. Crotch height 9. Gluteal furrow height 10. Kneecap height 11. Calf height 12. Functional reach 55.5 60.4 46.4 91.6 96.6 74.5 13.
    Сторінка 4-1 - The physical or chemical processes, design defects, quality defects, part misapplication, or other processes that are the basic reasons for failure or that initiate the physical process by which deterioration proceeds to failure.
    Сторінка 4-33 - ... enough spacing provided between components to allow for clips and test probes? 2. Is a standard grid used on boards to facilitate component identification? 3. Are all components oriented in the same direction? 4. Are standard connector pin positions used for power, ground, clock, etc., signals? 5. Are power and ground included in the I/O connector? 6. Are connector pins arranged such that shorting of physically adjacent pins will cause minimum damage? 7. Is each hardware component clearly labelled?...
    Сторінка 7-15 - M 106 9 5 289 *Same as 12, however, right shoulder is extended as far forward as possible while keeping the back of the left shoulder firmly against the back wall Weight (kg) 5th percentile Ground troops Percentile values in centimeters Aviators Women 95th percentile Ground troops Aviators Women Standing body dimensions 1 . Stature 2. Eye height (standing) 3. Shoulder (acromiale) height 4. Chest (nipple) height* 5. Elbow (radiale) height 6. Fingertip (dactylion) height 7. Waist height 8. Crotch height...
    Сторінка 7-2 - Continuously experienced. Will occur frequently. Will occur several times. Unlikely, but can reasonably be expected to occur. Unlikely to occur, but possible.
    Сторінка 4-33 - Mechanical design 1 . Is enough spacing provided between components to allow for clips and test probes? 2. Is a standard grid used on boards to facilitate component identification? 3. Are all components oriented in the same direction? 4. Are standard connector pin positions used for power, ground, clock, etc., signals? 5. Are power and ground included in the I/O connector? 6. Are connector pins arranged such that shorting of physically adjacent pins will cause minimum damage? 7. Is each hardware...
    Сторінка 25-10 - Keane' s project managers use network techniques to assist them. Two such techniques have come into prominence in recent times, those being the program evaluation and review technique (PERT) and the critical path method (CPM).

    Посилання на книгу

    Fiabilidad, mantenibilidad, efectividad: un enfoque sistémico
    Alberto Sols
    Обмежений попередній перегляд - 2000
    Усі результати пошуку книг »

    Про автора (2010)

    James V. Jones, president of Logistics Management Associates in Irvine, California, is an internationally recognized expert on supportability engineering and integrated logistics support. He is a logistics professor at The University of Portsmouth, United Kingdom, and has been a guest lecturer at other colleges and universities. The author of several technical reference books, Mr. Jones is sought after as a consultant, lecturer, and educator around the world.

    Бібліографічна інформація